The Classic Accessories Boat Cover, part # 052963889383 is designed to fit tight around the boat but does not fit around the motor.
There are so many motors available it would be tough to make a cover that would fit over the motor and provide a tight fit. We do not offer boat motor covers. view full answer...
The Tow Ready Vehicle to Vehicle Taillight Converter, # 118158, is typically used on motor homes that are towing another vehicle by way of tow bar.
The converter is not a sealed box so if it were to be submerged in water or exposed to rain, it would be damaged. If you choose to use this part on your boat trailer, you will want to make sure that the converter is mounted in a location that protects it from water. view full answer...
The Stromberg Carlson JET-2500 Electric Tongue Jack uses a 12-volt motor. Under load, the motor draws 24-25 amps and the motor is fed by a 12 gauge wire.
The best practice is to power the jack via a trailer mounted battery. You can use the 12-volt accessory circuit from the 7-way to maintain the battery, but it cannot charge a depleted battery. Using the accessory pin on the 7-way to directly power the jack can be problematic because of the long run from the vehicle battery. Drawing the... view full answer...
The Classic Accessories 9' Pontoon Boat # CA69660, that you referenced, comes with a 2-year warranty and there is a repair kit available!
For the repair kit you will want part # CA32005 which fits easily into the pocket on your pontoon boat. It comes with the following:
Spring clevis pins to secure frame - 4 large
Replacement inflation valve
Inflation adapter - use with a variety of pumps
Valve wrench
Bladder patch kit
Corrosion-resistant oarlock with cotter pin for secure fastening
Wing... view full answer...
The Classic Accessories DryGuard Waterproof Boat Cover, part # CA20083, is designed to keep the interior of your boat dry and clean. The PVC-free fabric resists mildew, and is resistant to UV rays. This cover has two rear-air vents that have built-in stiffeners and allows moisture on the interior to escape.
Although there is no guarantee to eliminate mildew completely, the vents will help reduce the chance for condensation build-up and mildew. I would recommend removing the cover occasionally... view full answer...
The discontinued Shelby 5407 is a single-speed, 1,700 lb hand winch, and we can get you a replacement with a higher capacity. The best option for that is a winch from Dutton-Lainson:
- Dutton-Lainson Hand Winch # DL14881
The # DL14881 is a 3,500 lb capacity, 2-speed winch with a manual hand brake. Going with a 3,500 lb capacity will give you some margin for error because the capacity is reduced as the line builds up, so I strongly recommend the 3,500 lb winch.
The other thing you will... view full answer...
The Stromberg Carlson # BA-100 2 inch motorhome hitch receiver weighs just a bit less than 9 lbs.
The receiver is designed for use on 4 x 4 inch or 4 x 4-1/2 inch bumper and has a 200 lb capacity. The hitch isn't meant for towing, it's meant to be used as an attachment point for hitch accessories.
I've linked you to a product description video featuring the RV bumper recevier. view full answer...
Alright, I think we can help you out here with your questions regarding the Jif Marine pontoon boat ladders; first, let's start with the correct part numbers for the 4- and 5-step ladders so we're on the same page in that regard, and then I'll go over your questions one by one:
- 4 Steps: Jif Marine Underdeck Pontoon Ladder for Flat Decks # JIF45FR
- 5 Steps: Jif Marine Underdeck Pontoon Ladder for Flat Decks # JIF75FR
1) When the ladder is pulled out of the base, it is not perpendicular,... view full answer...
The Classic Accessories RV Wheel Covers, part # CA80083, features an elastic hem on the top/rear of the cover that helps grip the tire at the top, where it is most likely to catch wind moving under the RV. You may want to review the comments from other purchasers of this product, whose experiences might be helpful in your decision-making process. If you return to the product page for this item and scroll down to the Customer Reviews section you will be able to see what other customers thought... view full answer...
Installing a front mounted hitch like Curt Front Hitch for the 2012 Silverado, part # C31023 on your Silverado would provide more visability when moving a trailer into position. It has a 2 x 2 inch receiver opening, and can also accomodate other accessories like winches, snowplow, and cargo carriers. This hitch has a line pull capacity of 9000 lbs and a tongue weight capacity of 500 lbs. This hitch has easy, bolt-on installation and requires no welding for installation, but does require... view full answer...
The 12V power circuit on a motor home's 7-Way socket, which is typically protected with a 40-amp circuit breaker like # PK54540, will deliver a maintenance level charge to a connected battery on either a towed vehicle or trailer. However, a depleted battery will NOT get a full charging current from this auxiliary 12V feed and will not fully re-charge. An A/C shore-power charger like the CTEK # CTEK56865 can re-charge a depleted battery.
Some vehicles when flat towed will need to have their... view full answer...
The Chevy Spark can be flat towed only if it has a manual transmission. To flat tow the Spark, you will need a base plate, I recommend Blue Ox Base Plate Kit, # BX1725.
For the tow bar, I recommend The Blue Ox Avail Tow Bar, # BX7420. This non-binding design makes hooking up and unhooking the Spark from the motor home so much easier. The latches release tension to allow you to unhook the Spark from multiple angles compared to other tow bars that require the setup to be completely in... view full answer...
The Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide, # C13704 is designed to be bolted or welded to the vehicle frame. My recommendation is to check with your RV's manufacturer if this type of installation can be safely and securely attached at the point you described. When properly installed, the Adjustable Width Trailer Hitch Receiver, # C13704 provides a Class III, 2" x 2" receiver opening with a maximum gross trailer weight rating of 5,000 lbs. and a 500 lb. tongue... view full answer...
The load range C Provider ST175/80R13 Radial Trailer Tire # TTWTRTM1758013C has a speed rating of M, which is 81 mph; and there are tires with speed ratings of N, though not for 12 inch tires; for that the highest speed rating the 81 mph M-rated tire.
There are two things you can do in order to reduce blowouts, one of which is not exceed the speed rating, but the other is absolutely go to a radial trailer tire. These flex more and run cooler than bias trailer tires, so if you are using... view full answer...
What I can tell you is that switching from incandescent lights to the LED Combination Tail Light Kit # TLL56RK for your ShoreLand'r trailer will 100 percent prevent you from continually blowing fuses. The reason is the minuscule power draw of these lights, with the stop and turn lights drawing about 0.27 amps and the marker lights about .06 amps. Your problem will definitely be solved in that regard.
What we don't know for sure is everything the fuses on your 2013 Honda Pilot serve. I... view full answer...